Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2006 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Control arm bushing replacement problem 900

posted by  someone claiming to be Felix_the_caT on  Tue Aug 31 15:42 CST 2010 [RELATED]

Well, your first problem is that that isn't a control arm, it is a torque arm and is from the rear. Control arms are in the front. You can not press them in from the top, because pressing them like that makes them squish and get wider, making it impossible to fit in the hole no matter how much force you use. You have to kind of stretch it out using the bolt hole so it gets skinnier as you stretch it. Heating the arm (not hot enough to melt the bushing) might help some also, as well as some soapy water. You sure you got the right bushing? It looks kind of odd.

good luck






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Control arm bushing replacement problem [900]
posted by  sasjzl  on Tue Aug 31 14:12 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.