Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2003 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Is this the correct dual-outlet manifold? 120-130

posted by  Volvo From Heck on  Thu Sep 16 07:06 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 13 20:56 CST 2014
[RELATED]

The manifold from the FI models has a hole under the middle runners to accomodate a steel locating pin that's pressed into the head. Your manifold will work just fine. You may have to fabricate custom washers to clamp the aluminum manifold/cast iron as they may have different thicknesses. Some folks machine the thicker surface down. I brazed a half a manifold washer to a whole one to make the step with my B20--FI exhaust-aluminum intake. -- Dave






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Is this the correct dual-outlet manifold? [120-130]
posted by  red92s subscriber  on Thu Sep 16 06:31 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.