Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2013

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Monroe Max-Air Adjust Shocks in 940?

posted by  kerry on  Sun Sep 19 07:55 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Sep 11 08:15 CST 2014
[RELATED]

Just did this mod to replace the Nivomats on a 90 764T. You can see the thread on Turbobricks.com if you do a search.

Easy enough if you have all the tools. I burned the lower mounting points out of the Nivomats, had a bit of trouble finding a 5/8's, reduced shank drill bit, and wished I had a press. But doable in about 5 hours. Cool to see the car go up and down with air pressure! My compressor is limited to 125 psi, so I souldn't get it as high as I wanted.

Overall a good mod, much better than the crappy IPD replacement kit. I will do this mod to my nieces 964 when I get some time.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Monroe Max-Air Adjust Shocks in 940?
posted by  vacuumhead  on Sun Sep 19 06:36 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.