Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2013 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Another update 200 1988

Thanks again everyone for the tips! I had the car towed home. The connector to the hall effect sensor looks very loose, I'll try to pull the distributor and see if any of the wires there got disconnected. The cam rotates when I try to start the car. The 25 amp fuse doesn't look too good (it looked bad before the problems started). Doesn't jumping fuses 4 and 6 bypass the 25 amp? Also, when I tried starting it today, it felt like it was going to start for about a second, before dying out again.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Car stalled on bump, cranks but no ignition. [200][1988]
posted by  dvoytenk  on Sat Sep 25 13:16 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.