Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Persistant coolant temp check engine light 200 1990

uid 18083's pic
posted by  lucid on  Sun Oct 3 13:07 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 12:31 CST 2014
[RELATED]

"So there a ground associated with the sensor in the wiring that could be corroded and causing it to not ground sufficiently sometimes?"

No, your Coolant Temp Sensor does not use a discrete ground wire. Grounding is accomplished by the sensor body's contact with the tapped hole in the head.

If you have mistakenly used teflon tape or other thread sealant, I believe it could affect the grounding. There should be a copper sealing washer under the sensor head.

--
Bruce Young, '93 940-NA (current), 240s (one V8), 140s, 122s, since '63.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Persistant coolant temp check engine light [200][1990]
posted by  Marvelous3  on Sat Oct 2 20:39 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.