Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Need Help with Front Coil Spring Information - Tears without Measure 200 1977

uid 40935's pic
posted by  Goatman on  Tue Oct 19 07:49 CST 2010
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Jul 26 20:30 CST 2014
[RELATED]

Hi,


I just completely refit my front end with new control arms, struts, bushings, inner and outer tie rods, and wheel bearings.

This vehicle is a 1977 264 GL. I installed a lighter B23F instead of the heavy B27 six cylinder.

After adjusting the strut all the way inboard, the camber is still positive. The front end rides pretty high from the wheels which I actually like, because the suspension travel is enhanced.

The camber is out of spec, however. I see that the 240 Turbo models had different springs then the other models. Also, the six cylinder had alternate parts.

What are the part numbers and the differences between the options? I’d like a stiff spring, but I cannot align the hub correctly without camber plates at this ride height.


Goatman






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ANSWERED Need Help with Front Coil Spring Information - Tears without Measure [200][1977]
posted by  Goatman  on Tue Oct 19 07:49 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.