Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2019 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Is Tasca the only source for speedometer sensor o ring? 200 1990

posted by  1990Volvo240 on  Sun Jan 30 18:09 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 3 13:18 CST 2014
[RELATED]

Here was my message I posted a few days back stating the problem:

http://www.brickboard.com:80/RWD/volvo/1465441/220/240/260/280/uncommon_speedometer_problem.html

Both speedometer/odometer do not work.

After the post I made about it's problems I pulled the speedometer board, cleaned it, reflowed some solder joints and still the same problem.

The one thing that makes both speedometer/odometer function is pulling back on the high beam switch just at the point before the highbeams switch on/off it will function-if you hold it at that position.

I took a quick look yesterday at the speed sensor and there was a bit of oil leaking. I haven't yet fiddled around back there as it seemed to me to be something wacky with the cluster due to the high beam interaction . But since the oil is leaking I figured I would switch the o ring and clean the wires up back there.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Is Tasca the only source for speedometer sensor o ring? [200]
posted by  1990Volvo240 subscriber  on Sat Jan 29 16:10 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.