Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

PLease help with codes 200

posted by  dinomartino on  Wed Mar 2 07:19 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 04:43 CST 2014
[RELATED]

113: fault in fuel injectors
212: oxygen sensor signal absent or faulty
232: fuel system compensating for rich or lean mixture at idle

How is the car running? Is the idle really rough? If you unplug one fuel injector at a time while it is running, does the idle get a lot rougher?

Make sure the oxygen sensor connector has clean and tight connections. The 02 signal is carried by the single wire (green, I think) thru the spade connector cocooned in a rubber cover on the passenger side back near the firewall. The other o2 wires are for the sensor heater circuit, don't worry about those (as long as they're plugged in).

john
--
1989 245 233K / 1993 945 127K






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New PLease help with codes [200]
posted by  DEVO! subscriber  on Tue Mar 1 23:10 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.