Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Something else 200

uid 18083's pic
posted by  lucid on  Mon Apr 4 12:32 CST 2011
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 12:31 CST 2014
[RELATED]

Three things affecting the Pump relay:

• Fuse 7 (hot from battery) feeds +12V to the pump relay terminal 30.
When relay is energized, the +12V goes from relay terminal 87 to the pumps.
Make sure fuse 7 and it's contacts are clean and tight.
Spinning the fuse in it's contacts is sometimes a quick fix.

• Fuse 13 (Hot with Key On) powers the pump relay coil at terminal 15.
As with #7, make contacts clean and tight.

• Besides 12V at terminal 15, the Pump relay also needs negative Ignition coil pulses at terminal 31b (Red/White wire). These pulses come from Coil terminal 1. Take that connector off and on a couple of times. Terminal 15 too, while you're there.

--
Bruce Young, '93 940-NA (current), 240s (one V8), 140s, 122s, since '63.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 81 240 Fuel Pump Relay? Or something else [200]
posted by  kumozombie  on Mon Apr 4 09:55 CST 2011 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.