Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Extra connector? 200 1988

posted by  Art Benstein on  Sun Feb 12 13:08 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 17 20:10 CST 2014
[RELATED]

Peel back the boot on the connector and post back with the wire colors. There are no "extra" connectors of that type on your car, and certain of them, if inadvertently exchanged, will damage your ECU.

The ECT (Engine Coolant Temp) sensor below the 3rd runner is accessible with a 10" extension and deep 19mm socket, if you remove the AMM and throttle body plumbing. No need to pull the manifold, although getting a new gasket there is never a bad idea.
--
Art Benstein near Baltimore

Don't be irreplaceable -- if you can't be replaced, you won't be promoted.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Missed Connection? (coolant temp sensor)
posted by  amorphous  on Sun Feb 12 10:53 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.