Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2014 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Susan's Radiator Problem SOLVED! 200

There's a lot of churn here but some of the basics still aren't mentioned:

1. Are the belts adjusted correctly?

2. You should eliminate temp-comp board. There are how-to pics here and on Art B's site. Have it done if you can't; or maybe there's someone from this board near you. But you're reacting to a gauge that might be giving a false reading.

3. Did the tech who replaced the thermostat get the correct one and position the vent correctly? I just puled a non-vented one from a 240, presumably a local parts store "The part number is different but this is the exact same thing ..."

4. The foaming thing is new to me. Overheating IME is: loose belts, sludge/scale in the system, bad thermostat, or (rarely) a bad impeller in the water pump.

--
240 drivers & parts cars - Ohio






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1 Susan's Radiator Problem SOLVED! [200]
posted by  someone claiming to be susan  on Tue Mar 13 09:50 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.