Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2010 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

OD help (OD guru?) 120-130

uid 55's pic
posted by  john sargent on  Sat Jul 7 11:15 CST 2012
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 09:07 CST 2014
[RELATED]

You'll have a difficult time finding a 1/4"-28 to 1/4"-28 stud, so buy a tap bolt and cut it off. Tap bolts are bolts which are fully threaded to the head of the bolt. Studs are supposed to have a different cut of thread (-3F if I remember correctly so they have a slight interference in the part they are threaded in to. Since the tap bolt will have -2F threads for easy use with nuts, use red or blue Loctite when you install the stud (you make from the tap bolt) into the overdrive. That is what I did on John Douglas' overdrive.
--
john






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New OD help (OD guru?) [120-130]
posted by  agent_strangelove  on Thu Jul 5 09:47 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.