Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2020 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

code 232 on pin 2 & no start 700

the code is "compensating for lean/rich mixture at idle", which could be caused by any number of things.

Yesterday you posted something about the car blowing black smoke, which on a turbo often indicates a leak in the pressurized intake system (check all connections b/w turbo and throttle). And intake air leaks will certainly screw with the mixture. Had you resolved that issue before the no-start situation developed?

As to the no-start, you've apparently been having a major cleaning session under the hood, so methodically go back over EVERY connector you've messed with and make sure it is firmly seated.

In another thread, people have pointed you to the Idle Air Control. Make sure you did not mix up the connectors for the Idle Air Control and the Throttle Position Switch, which is easy to do. IAC wires are Blue/Yellow and Red/Black. TPS wires are Orange, Black, and Red/White. The car will not start if the IAC is disconnected.

john
--
1989 245 241K / 1993 945 127K






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New code 232 on pin 2 & no start [700]
posted by  kayakguy7  on Sun Sep 2 12:56 CST 2012 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.