Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2002 200 INDEX

[<<] [>>]

VIEW

REPLY TO THIS MESSAGE

Replies to this message will be emailed.

SAVE

Trailing Arm Bushing Time! 200 1992

posted by B0RK ^3 on Tue Jan 22 13:32 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS]

[IGNORE ALL POSTS]

last visit: Wed Oct 15 18:09 CST 2014

[RELATED]

This is the link I used to make my tool...

http://www-ese.fnal.gov/People/wilcer/volvo_trailing_arm_bushing_tool.htm

It turned out less than perfect tho. Even with the right tools. (my fault) It did the job pushing out the bushing, but when I pushed the new one back in, the diameter was too small, and I accidentally pushed and broke a bit of the rubber on the new one.. So, I had to create a makeshift washer to prevent it from destroying it upon re-entry.... So don't think you're out of the water once you've pushed the old one out. Be careful pushing the new one in. And don't be afraid to STOP and back off, just to make sure you're doing it right.

THREADED

THREADED EXPANDED

FLAT

PRINT ALL

MESSAGES IN THIS THREAD

Trailing Arm Bushing Time! [200][1992]
posted by Dan Marino on Tue Jan 22 11:14 CST 2013 >

Trailing Arm Bushing Time! [200][1992]
posted by B0RK ^3 subscriber on Tue Jan 22 11:42 CST 2013 > V
- Trailing Arm Bushing Time! [200][1992]
  posted by javalion subscriber on Tue Jan 22 13:22 CST 2013 > V
  - Trailing Arm Bushing Time! [200][1992]
    posted by B0RK ^3 subscriber on Tue Jan 22 13:32 CST 2013 > V
    - Trailing Arm Bushing Time! [200][1992]
      posted by JPistos subscriber on Wed Jan 23 12:48 CST 2013 > V
  - Trailing Arm Bushing Time! [200][1992]
    posted by B0RK ^3 subscriber on Tue Jan 22 13:36 CST 2013 > V
    - Trailing Arm Bushing Time! [200][1992]
      posted by javalion subscriber on Tue Jan 22 14:15 CST 2013 > V

Trailing Arm Bushing Time! [200][1992]
posted by unggthat on Tue Jan 22 13:01 CST 2013 > V

Trailing Arm Bushing Time! [200][1992]
posted by javalion subscriber on Tue Jan 22 13:12 CST 2013 > V

Just for purposes of information [200][1992]
posted by bulletproof subscriber on Tue Jan 22 14:04 CST 2013 > V
- Just for purposes of information [200][1992]
  posted by derek uk subscriber on Tue Jan 22 14:59 CST 2013 > V
  - Just for purposes of information [200][1992]
    posted by Dan Marino on Wed Jan 23 07:37 CST 2013 > V
    - Just for purposes of information [200][1992]
      posted by TONY H subscriber on Wed Jan 23 08:17 CST 2013 > V

Trailing Arm Bushing Time! [200][1992]
posted by rstarkie subscriber on Wed Jan 23 08:06 CST 2013 > V
- Trailing Arm Bushing Time! [200][1992]
  posted by Dan Marino on Wed Jan 23 11:54 CST 2013 > V

polys [200][1989]
posted by anthony2 on Wed Jan 23 22:58 CST 2013 > V
- polys [200][1989]
  posted by Swedish Baklava on Thu Jan 24 06:23 CST 2013 > V
  - polys [200][1989]
    posted by anthony2 on Mon Jan 28 23:47 CST 2013 > V
    - polys [200][1989]
      posted by Swedish Baklava on Tue Jan 29 07:50 CST 2013 > V

Got All The Parts [200][1992]
posted by Dan Marino on Thu Jan 24 17:35 CST 2013 > V

Tool Built What Size Sockets and Wrenches? [200][1992]
posted by Dan Marino on Mon Jan 28 09:01 CST 2013 > V
- Tool Built What Size Sockets and Wrenches? [200][1992]
  posted by JPistos subscriber on Mon Jan 28 11:52 CST 2013 > V
  - Tool Built What Size Sockets and Wrenches? [200][1992]
    posted by Dan Marino on Mon Jan 28 13:35 CST 2013 > V
- Tool Built What Size Sockets and Wrenches? [200][1992]
  posted by javalion subscriber on Mon Jan 28 11:59 CST 2013 > V
  - Tool Built What Size Sockets and Wrenches? [200][1992]
    posted by Dan Marino on Mon Jan 28 13:34 CST 2013 > V
    - Tool Built What Size Sockets and Wrenches? [200][1992]
      posted by javalion subscriber on Mon Jan 28 13:53 CST 2013 > V
      - Tool Built What Size Sockets and Wrenches? [200][1992]
        posted by Dan Marino on Tue Jan 29 07:27 CST 2013 > V
        
        Tool Built What Size Sockets and Wrenches? [200][1992]
        posted by Swedish Baklava on Tue Jan 29 07:51 CST 2013 > V

Got Started Tonight [200][1992]
posted by Dan Marino on Wed Jan 30 20:41 CST 2013 > V

Half Way Done [200][1992]
posted by Dan Marino on Sun Feb 3 21:09 CST 2013 > V
- Half Way Done [200][1992]
  posted by pageda on Mon Feb 4 02:00 CST 2013 > V
  - Poly Torque Rods [200][1992]
    posted by Dan Marino on Mon Feb 4 06:30 CST 2013 > V
- Half Way Done [200][1992]
  posted by B0RK ^3 subscriber on Mon Feb 4 10:43 CST 2013 > V

Update -2nd Bushing In! [200][1992]
posted by Dan Marino on Wed Feb 6 06:42 CST 2013 > V
- Update -2nd Bushing In! [200][1992]
  posted by javalion subscriber on Wed Feb 6 10:00 CST 2013 > V
- Update -2nd Bushing In! [200][1992]
  posted by derek uk subscriber on Wed Feb 6 16:45 CST 2013 > V
  - Update -2nd Bushing In! [200][1992]
    posted by Dan Marino on Thu Feb 7 09:12 CST 2013 > V
- Update -2nd Bushing In! [200][1992]
  posted by B0RK ^3 subscriber on Thu Feb 7 16:08 CST 2013 > V

Trailing Arm Bushing Time! [200][1992]
posted by David Samuels subscriber on Fri Feb 8 09:24 CST 2013 > V
- Trailing Arm Bushing Time! [200][1992]
  posted by B0RK ^3 subscriber on Fri Feb 8 10:25 CST 2013 > V

Trailing Arm Bushing Time! [200][1992]
posted by Dan Marino on Fri Feb 8 13:19 CST 2013 > V

<< < > >>

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.

Volvo RWD/200 Forum Index

Community Forums:

RWD

AWD

GATHERINGS

OPINIONS

PICKNPULL

V8

STORIES

Classifieds

Site Features

RWD Series/Models

AWD Series/Models

Volvo RWD 200 Forum

Trailing Arm Bushing Time! 200 1992