Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Introduction... and questions regarding rough/lumpy idle 200 1993

posted by  mike.volvo.240 on  Tue Oct 22 08:18 CST 2013
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Aug 22 04:26 CST 2014
[RELATED]

Hi Matt,

I've certainly learned alot about Volvo's in the past 2 months! The parts are fairly cheap and I really like working on it in my spare time.

Thanks for the input! I forgot to mention that I did replace the brake booster check valve and brake booster vacuum hose. The brakes seems fine. I have also pinched the brake booster vacuum line to test the booster itself and I haven't seen any change in the lumpy idle.

I've also clamped the vacuum line going into the cabin that controls the vents (and possibly other thing). Again, no change in the lumpy idle.

I'm tempted to pick up a reman MAF (AMM) and see if that changes anything, but I feel that will be a waste of money.

- Mike






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Introduction... and questions regarding rough/lumpy idle [200][1993]
posted by  mike.volvo.240  on Tue Oct 22 07:22 CST 2013 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.