Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Installed B Cam 200 1992

posted by  Dan Marino on  Sun Jan 26 21:42 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:46 CST 2014
[RELATED]

This weekend my 16 year old son and I installed a B cam in our 1992 normally aspirated 240 wagon. 6 valves were out of spec on the loose side. We didn't have the valve shim tool so we installed the cam, measured the clearances, and then removed the cam to change in the proper valve shim discs. A digital micrometer and the IPD shim kit made the job go well. This was the first time I've ever checked the valve lash on my Volvo 240. It was a good learning experience for both my son and I.

We took the wagon on a test drive and it seems to run well at high speeds/rpm.






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.