Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Fixed 200 1992

posted by  Dan Marino on  Mon Jul 14 13:49 CST 2014
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:46 CST 2014
[RELATED]

Ok the problem has been fixed. Following Art's example of soldering those double male connectors to the tail light lens and running wires to the back of the bulb holder did the trick on the melted after market lens.

I was still getting the bulb out warning light in the dash due to the driver's side brake light. Looks like I didn't get the bulb holder secured back into the lens correctly when I installed a new bulb.

My son is happy to report that the warning light has been out for over a week and we verified that all the brake lights are working properly.

Many thanks to all.

13






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Bulb Sendor On In Cluster, but Brake Lights Working Fine [200]
posted by  Dan Marino  on Mon Jun 23 12:29 CST 2014 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.