Volvo RWD 1800 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2007 1800 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

73 ES PCV connection 1800

posted by  planetman on  Fri Feb 13 22:38 CST 2015
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 09:29 CST 2014
[RELATED]

Hello,

I found a picture of the original style of air filter housing for an 1800E and 1800ES on ebay at the address below.

http://www.ebay.com/itm/Volvo-Jensen-P1800-1800-E-S-ES-Air-Filter-Intake-Box-/121553621345?hash=item1c4d291161&vxp=mtr

However that may not be the correct one for an 1800ES as there were 2 different ones.

The earlier version has a threaded hole for the air temperature sensor for the fuel injection located in the engine bay side of the air tube and the breather hose is connected to intake manifold in front of the throttle plate.

While the later version also has an additional unthreaded hole in the air tube for the breather hose.

You don't need a restricter, but I like to use an inline check valve to reduce the amount of oil vapors that get into the air tube.

AFAIK, no one makes that hose and I have to splice together 2 hoses, 1 with a 90° bend, to make up a hose long enough to fit.




--
Eric
Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
Torrance, CA 90502






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 73 ES PCV connection [1800]
posted by  Rainflye  on Fri Feb 13 08:00 CST 2015 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.