Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

transmission cooling line source 200 1991

posted by  riverbend on  Thu Jul 23 19:24 CST 2015
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 15:29 CST 2014
[RELATED]

Does it have a hole where the clamp holds the lines to the bellhousing ? If so, I used a couple compression fittings and a short piece of tubing to repair the leak. The line is not really high pressure or failure critical ( like a brake line ) so the compression fittings are adequate. Check for leaks until you are satisfied the repair is sound and the fittings do not need to be tightened anymore.

Greg





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New transmission cooling line source [200][1991]
posted by  sedan delivery  on Thu Jul 23 10:03 CST 2015 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.