Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2008 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

problem solved 200 1992

posted by  riverbend on  Wed Dec 23 14:14 CST 2015
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 15:29 CST 2014
[RELATED]

After replacing the dip beam relay, the headlight relay (safely located in the middle of the dash) and the turn signal switch, I noticed that the screw holding the ground wire on the steering column, located just forward of the TS switch, had fallen out. Reconnecting the wire fixed the high beams.

As long as I'm this far along, I'm going to replace the burned out dash lights and add a voltmeter.

Thanks for the suggestions and wiring diagrams.

Greg





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New troubleshooting no highbeams [200][1992]
posted by  riverbend subscriber  on Tue Dec 22 17:34 CST 2015 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.