Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2008

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Engine Rebuild details

posted by  Will740turbo on  Wed Jun 10 17:37 CST 2020
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 16:09 CST 2014
[RELATED]

The machine shop looked at it and put a straight edge to it.

They said it has about 9 thousandths of an inch warp on the long axis. They are going to do a valve seal vacuum test and see what that tells us.

The limit I'm seeing says 1.0mm or .039 inches.

He is concerned that the cam may rock and need an alignment bore, but it has run like this for quite some time, I believe.

I'll try to post the page where I found those values. It references tp30927/1 section 2(21).






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Engine Rebuild details
posted by  Will740turbo subscriber  on Wed Jun 10 02:16 CST 2020 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.