Volvo RWD 1800 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2002 1800 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Fusebox fire! 1800 None

posted by  jgcoutts on  Wed Dec 31 18:00 CST 1969
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Ron, thanks for the response, I wasn’t sure the Bakelite would take much more pressure from tightening the tab so thought a little help from epoxy would be an option. I keep a little plasticine handy to close off escape routes so might give one of my older spares a go. When I started pulling out the old wiring harness and discovered the schematic for the cigar lighter circuit was incorrect and then traced it back in-fused to the battery I figured that needed to be dealt with, and since then have read your advice regarding the single fuse box amperage reduction. Just looking for some period correct Lucas 8 or 10amp to put in place of the 35.

What do you suggest for the amperage of an inline fuse at the cigar lighter?

Thanks
Graham

Sent from Graham's iPhone





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Fusebox fire! [1800]
posted by  someone claiming to be Dave  on Fri Jan 10 17:42 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.