Volvo RWD 1800 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2019 1800 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

1800E mixture lean over 3000rpm 1800

posted by  B20Paul. on  Thu Nov 18 18:52 CST 2021
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 20 10:54 CST 2014
[RELATED]

Did you return the fuel pressure to stock?

Did you get a programable 123, or the 1st version?

If you have V1, the only useful setting is for B20E/F, I'd use that on B18B & B20B's & then the curve is still too slow.

(The advance curves are designed for 1960's fuel quality.)

The only curves with vacuum advance are B18A & B20A, the rest have retard & the B18B had none at all.

I'm also wondering does the 123 D-Jet part work correctly? Putting the stock distributor back in 1st might have been the 1st thing to do to fix a D-Jet problem.

Also, 9.5:1 compression? I'm assuming you want to run on the lowest octane possible?

I'd like to see you get a dial indicator & degree wheel & verify that it is in fact a D cam & close to degreed in properly. Following the Greenbook method would be OK if you don't want to go to 'the hassle', BUT, the inlet system from the start of the manifold to the combustion chamber & the cam inlet duration & LSA are set in stone in the VE curve of the D-Jet box.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1800E mixture lean over 3000rpm [1800]
posted by  someone claiming to be Rick  on Mon Oct 11 17:14 CST 2021 >
  • New n.t. [1800]
    posted by  B20Paul. subscriber  on Thu Oct 14 12:04 CST 2021 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.