Hi Randy,
Thanks for that FAQ link, which somehow I missed before by selecting wrong keywords maybe.
It had a discussion of cold solder joints in the OD relay, which I thought
was OK since the shifter switch and downshift light was OK.
Then I checked the schematic and the solenoid and light are on different outputs.
The solenoid output on relay pin #87 had a confirmed cold solder joint.
I need to get on the highway to test, later, not now, with the roads covered
with school buses and wall to wall traffic. After confirming that it's fixed
you'll get the "Hero of the day award" and a free beer or three if you can find me.
My mailman dropped off the bypass kit just after finding the cold solder joint.
Happy new year, Bill
|