Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2004 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Fuel pump tank cap - Soldered wires broke off 700 1990

I've got this pretty well figured out. I want to do a write-up for the FAQ on it, but until then I think that you can use this if you end up in my situation:

1 foot of 1/4inch SAE 30R10 grade fuel line, which is rated for submersion in fuel. Most line can only tolerate fuel on the inside.
Gates: Part# 27087 Product# 42190014 - 1/4" X 10 FT SUBMERSIBLE FUEL LINE

TFFN wire - 18awg should work. Be sure to keep the clear jacket intact. This is a flexible version of THHN wire. TFFN is Flexible Fixture wire while THHN is High Heat wire.

I think I will be able to remove the solder by first cleaning the corrosion off and using a cheap 25-30 watt Harbor Freight soldering iron. We'll see how that works.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Fuel pump tank cap - Soldered wires broke off [700][1990]
posted by  Will740turbo subscriber  on Sun Jul 14 02:15 CST 2024 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.