Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2003

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Can't extract OBD1 DTCs -- 1995 940 (Bosch)

posted by  B.B. on  Wed Jul 17 14:30 CST 2024
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 6 13:15 CST 2014
[RELATED]

Hi Wilson,

I had trouble with some of the female bullet connectors failing. The molded
silicone supporting the female bullet pins just crumbles away into a bunch of little pieces, then the pins can fall out or push down so they don't connect.

Get a flashlight and see if A2,A3,& A6 female pins are not pushed down so your
jumper doesn't connect. If they are gone you can get new pigtails from Dave Barton to splice in there.

If that isn't it, check the FAQ, I think there's a section help you troubleshoot OBD circuitry.

Keep cool, Bill






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Can't extract OBD1 DTCs -- 1995 940 (Bosch)
posted by  Allrounderco  on Wed Jul 17 13:50 CST 2024 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.