Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2014

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Chuck Jaxel and O2 sensor

posted by  someone claiming to be Sheldon Fast on  Tue Oct 31 12:33 CST 2000 [RELATED]

Charles: your email addres does not work for me.

I was having trouble with microsoft error trying to get to respond on the

Brick board.

After re reading your post the O2 sensor is merely reading what is

happening and sending info to computer. It can't "try to fix" the condition, it is only reporting what is happening.

Chuck : the reason I posted was 1.to make sure the measuring was correctly

interpreted, and if you used a DVM then it is correct.

2. to point out that it (O2 sensor)may be working correctly and whatever is

causing the leanness is more than the system can compensate for. Such as

leaks in your bellows coming from the AMM, something is really

driving the lean condition. I would bet your O2 sensor is working it is just

reporting what is going on.

There is a really good writeup at

www.mr2.com/TEXT/O2_Sensor.html which I have posted

before.

Sheldon





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Chuck Jaxel and O2 sensor
posted by  someone claiming to be Sheldon Fast  on Tue Oct 31 12:33 CST 2000 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.