Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2005 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Programming Method for Remotes 900 Most

posted by  someone claiming to be Jim Bowers on  Thu Mar 8 03:16 CST 2001 [RELATED]

I looked this up for a request and it is posted for his question. Since I took the trouble to copy this from the manual I thought others may want to save it.

This applies to the optional "Guard Alarm II" for 940/960 from 93 and the "Basic Model" for 960 from 1995 on.

PROGRAMMING NEW REMOTES:

All remotes which are to be used for the alarm must be programmed at the same time (max of 4).

METHOD:

- 1 Shut all doors, the bonnet and the boot.

-Turn the ignition on and off at least 5 times within 10 seconds, until the alarm LED begins blinking. Leave the ignition on.

(The first remote transmitter must be programmed within 15 seconds while the alarm LED is blinking.)

- Only press one of the two keys on the remote transmitter to be programmed.

(An acknowledgement from the alarm LED is indicated by a steady light for approximately 2 seconds and then a blinking light for 10 seonds.)

- Program other remote transmitters at a maximum of 10 second intervals, while the alarm LED is blinking.

- Turn off the ignition and verify functions on all of the remote transmitters.






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.