Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2003 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: Testing a Throttle Position Sensor 700 1990

You can also test it with the OBD diagnostic socket. Ignition switch on, engine off. Plug the test lead in to socket 2. Place something in the throttle linkage to prevent the switch from closing. Press the button on the diagnostic link twice, the light should flash and you are in diagnostic mode 2. Now, rotate the throttle to WOT and hold it there. The light will stop flashing, and will begin to flash a response code. For WOT, the code is 333. Then the light will flash rapidly again. Now let the throttle return to idle. If ok, a response code of 332 will flash.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Testing a Throttle Position Sensor [700][1990]
posted by  someone claiming to be Steve Ringlee  on Thu Oct 4 08:02 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.