Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2003 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

ABS Sensor Wires, Help please.. 700

posted by  someone claiming to be meckel on  Sat Feb 16 15:34 CST 2002 [RELATED]

Paul..

The wires from the front wheel abs sensors are connected to the wiring harness under the hood, by the top of the respective shock tower. Testing the resistance of the sensor from this connector with a multi-meter will help determine if the sensor and wiring is ok.

There are just two wires that run to each sensor. I guess you could just splice in new wiring between the connector and the sensor, provided the sensors test ok. Home speaker wire would probably even work. Used replacements are pretty cheap though. The last one I changed on mine ran about $15, including the entire wiring up to the connector.

-meckel
'90 745t m46






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ABS Sensor Wires, Help please.. [700]
posted by  PaulinTampa  on Sat Feb 16 12:59 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.