Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2010

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

engine shaking problem solved

special thanks to "ticktock" and "kwalsh".............
the engine shaking was finally pin-pointed to a deteriorated intake manifold gasket around the #1 abd #2 cylinder....... i re-torqued all the bolts and cleaned the areas and applied some red gasket maker (quick fix but will replace gasket later), and the "shaking" went away the next morning, the idle is now smooth, well, i now have a new: TP switch; IAV (idle valve); FPR, the gasket was the cause!! thanks again for the valuable info!! good day

91 940 gle 16v, 115k, 25 mpg hwy






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New engine shaking problem solved
posted by  someone claiming to be John  on Mon May 20 02:23 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.