Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Longer answer. 200 1990

posted by  B.C. on  Fri Jun 14 10:10 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Mar 28 22:28 CST 2012
[RELATED]

The turbo will likely fit. Then you will need ALL the intercooler and control system stuff. The ECU and sensors from the donor car. A "Rosetta Stone" to translate wiring color codes between your 1990 B230F and the 1984 B12FT wiring harness. The exhaust manifold and exhaust system. The B230F can - think - have a B21 head installed. You would need the reduced compression ratio but I don't know if swapping heads would do that.

On the other hand, go to http://www.flash.net/~noseoil/Volvo%20245%20turbo.htm and see how another brickster did it.

Enjoy,

Bob

:>)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Installing a turbo [200][1990]
posted by  90volvo240  on Fri Jun 14 06:58 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.