Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2008 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

91' 744 Misses When First Started 700 1991

I had the exact same thing happen on my 90 16v. I went through the car wash and it came out running on 2 cylinders. The distributor and everything under the hood seemed dry. I found out exactly what it was by dumping water on the distributor. the same 2 cylinders would miss. I don't know if this is recommended but I put dielectric grease on all the plug wire connections and then sealed them with ignition sealer. I haven't had the problem since.

good luck.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 91' 744 Misses When First Started [700][1991]
posted by  someone claiming to be Glen  on Sun Jun 23 13:24 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.