Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Speedometer problem... 200 1984

It is OK that you removed the panel, but it wasn't necessary. The plastic pieces break rather easily. You should be able to pull up on the cable and housing assembly enough to get a LITTLE slack to insert the end back into the speedometer. Do this after you have lubed it and are ready to reinsert it. My 82 doesn't have the plastic piece and it works just fine. You will just have to fiddle with it to get the correct tension to hold it in place. I would reinstall the panel before attempting to adjust the cable to hold in place.

Randy






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Speedometer problem... [200][1984]
posted by  Volfro  on Wed Jun 26 08:53 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.