Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2019 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

740 Intermittent cut out problem 700 1988

uid 55's pic
posted by  john sargent on  Sat Sep 28 10:15 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 09:07 CST 2014
[RELATED]

The fuel injection relay is a known source of this type of trouble. You need to remove it, inspect it, and re-solder the larger electrical connections on the printed circuit board. Remove the cover from the relay and use a hand lens to inspect the solder joints. I know that you will find cracked solder joints if the relay has not been re-soldered or recently replaced. Go to the 700/900 FAQ and look under Electrical and Relays.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 740 Intermittent cut out problem [700][1988]
posted by  someone claiming to be Ginger  on Sat Sep 28 10:00 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.