Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2008

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

R134a AC system pressures?

Book says evacuate and weigh the charge is only way to ensure correct fill.

That being said, a very rough guide to high side system pressure, assuming everything else is ok like no clogged expansion valve or condenser, etc., is twice ambient temp in F. At 85F high side should read no higher than around 170psi....at 65-70 should read no higher than 140psi.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New R134a AC system pressures?
posted by  john sargent subscriber  on Sun Oct 20 06:49 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.