Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2014 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Bare Wire at Engine Temp Sensor? 200 1981

posted by  matt82dl on  Sun Dec 8 13:31 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 13 10:46 CST 2014
[RELATED]

I have an '82 that I just changed my harness on. You will be very suprised at what you find when you disect the old harness. I have no idea how my car continued to run with all of the insulation off of the wires inside the harness.

http://www.linkline.com/personal/dbarton/WireHarnesses.html

Dave Barton sells used newer harnesses. He is currently out of the 81-82 k-jet harness but keep checking. Harnesses come up on ebay and the clasadds at this site as well. Make sure you check the part number on the harness you purchase, the newer harnesses that dont degrade have different part numbers, your dealer can give you specifics.

If you are serious about keeping your car, which it sounds like you are if you are going through the trouble of changing the breather box on a k-jet, you definately want to replace the harness.

MRE
--
'82 DL - 151k, '93 945 - 99k






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Bare Wire at Engine Temp Sensor? [200][1981]
posted by  DougC  on Sun Dec 8 10:19 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.