Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2011

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Swapping a Garrett T25 for a Mitsu?

posted by  dick on  Thu Feb 27 14:15 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Aug 3 15:24 CST 2014
[RELATED]

You will need the following:

Oil feed line from engine to turbo
Both water lines to turbo (the metal ones)
Oil return from turbo to block

Advise to get new oil feed line, but the others used are fine. The turbo bolts to the manifold directly with no problems. At first I thought there was a problem, but seems to work with my 91 940 SE.

dick






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Swapping a Garrett T25 for a Mitsu?
posted by  nyroguls  on Thu Feb 27 06:55 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.