Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2004 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Failed Cold Start Injector/Valve 700

posted by  someone claiming to be Joe on  Sun Mar 16 13:14 CST 2003 [RELATED]

get a volt/ohm meter and measure resistance at temperature sensor when cold and hot, check against values in FAQ. Also there are two sensors, one to ECU is the one to check. If they read good at sensor than check at ECU side/. Connections at firewall have been known to cause problems.

If it is a bad injector, remove and replace seals and spray nozelle. 5.00 kit
good Luck






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Failed Cold Start Injector/Valve [700]
posted by  someone claiming to be Fred Sanford  on Sun Mar 16 12:24 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.