|
Seems to me there was a thread on this a while back and someone said there was a difference if you were converting to an M47 rather than an M46.
IF I remember right (and I'm not making any guarantees, others know lots more than I do about this)...the flywheel and bell housing from an AW70 auto transmission will interchange with an M46 (so long as the flywheel you install has the crank sensor holes if your car is set up that way), but the M47 will require a flywheel and bell housing specific to that transmission (you will need to take them from the same donor car or another one with an M47).
You need to look into this question before you proceed.
Good luck.
Doug Harvey
|