|
Turns out the reason it work only when the amm was unplugged is the bottom of the intake hose(bellow) was off. Resulting in a huge vac leak. So i'm back to where i strated ,hot restart problem. I can get it started warm/hot , only after excessive cranking , and when it finally does start , it bellows black smoke for about 1 minute then runs fine. As i said before both pumps are less than 6 months old, the IAc is new but when plugged in it runs the rpms up to 4000. The fpr is ok, cap and rotor is new new plugs, new harness(btw Dave Barton has a harness available if anyone needs one). I am kinda low on gas , about 1/4 tank , so i know i need some gas. The Temp. sensor is new also.
Thanks in advance.
--
Dan D. '85 245 DL , '93 945 .Delanisdjd@aol.com
|