Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

All done ... except for the bleeding 200

posted by  leugim on  Sat Jul 5 13:39 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Oct 18 20:49 CST 2014
[RELATED]

Boy was that a pain! You are correct in that the orientation is different. I finally solved it by cutting the 90 off the existing bracket and slipping the new bracket (after I flattened the jog on the mount side) under the old bracket and the blower housing. The new braket is too far from the hose that goes to the heater core. HINT for future: stub a piece of 5/8" hose to exixting heater core hose.

My hands are raw!!! But the job is done. Thanks!
--
Happy Motoring Miguel '86 244 and '87 245






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New New Heat control valve problem [200]
posted by  leugim subscriber  on Fri Jul 4 07:42 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.