Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2011 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

coolant loss from sensor 700 1989

posted by  someone claiming to be JohnB on  Sat Jul 19 00:30 CST 2003 [RELATED]

If it's leaking from around the sensor, simply pull the sensor and reinstall it using a teflon paste. Teflon tape works too but may insulate the sensor slightly more.

If the sensor is leaking itself..replace it. IIRC the sensor is embedded in a brass shell and shouldn't/can't leak except from around the brass shell and the iron block or aluminum head. Sounds more and more like a remove, seal, and reinstall. You may also be able to tighten the sensor a 1/4 turn or so and stop the leak.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New coolant loss from sensor [700][1989]
posted by  James uk  on Fri Jul 18 23:36 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.