Volvo RWD 700 Forum

INDEX FOR 2/2026(CURRENT) INDEX FOR 5/2024 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

How to make Fogs turn off when High Beams turn on? 700

uid 4372's pic
posted by  bagle on  Tue Jul 22 23:14 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Oct 28 00:26 CST 2001
[RELATED]

Take power from a low beam connection either at your added relay or at the light itself and use that to supply power to your foglight switch. This way you will only be able to turn on the fogs when the low beams are on. Fogs will stay off with headligts off. Note: holding the dimming stalk back will light both high and low beams (and fogs if switch is on). This is the only time that happens. You will have to release the stalk to get only high beams or low beams.
If you decide to do this, consider adding an in line fuse at the point of connection to protect your foglight switch wiring. (1 or 2 amps)
Hth

--
bagle 87 745t






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New How to make Fogs turn off when High Beams turn on? [700]
posted by  vinraz  on Tue Jul 22 16:17 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.