Where do we get these two items that were mentioned in the FAQ? Are they special order/dealer only? I do not have a local dealer close by so when I go to Seattle this weekend I will have to order them up. This method seems easier than the peice it together method though more expensive...
From the FAQ:
"Special Volvo Fittings to Make Connection. [Tip from Neal] Here are the Volvo part numbers for two hard to get parts needed to build a fuel pressure gauge assembly:
9995267-7 Nipple $27.45
9995116-2 Hose $ 9.30
The nipple is the fitting that connects between the rubber fuel line and the fuel rail. The hose includes the banjo fitting that attaches inline with the nipple. The other end of the hose is an unusual fitting that I imagine could connect only to a Volvo fuel pressure gauge. I cut that fitting off, and installed a 1/8" male pipe thread with barbed fitting pressed onto the hose. The 1/8" male pipe screws into almost any fuel pressure gauge found at any auto store. Make sure you get a gauge that goes to at least 100psi."
|