Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Adding speed sensor to M46 for M46 conversion on '89- 200 1989

posted by  john sargent on  Wed Sep 10 13:03 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 09:07 CST 2014
[RELATED]

You must mean the RPM sensor.

From about 1986 and on, the M46 bell housing is cast with a thin part to knock out for use on cars with the RPM sensor. If your M46 does not have this thin spot cast into it, all you have to do is drill, saw, and file the notch in the transmission. The RPM sensor is mounted to the engine block.

--
john






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Adding speed sensor to M46 for M46 conversion on '89- [200][1989]
posted by  someone claiming to be John B  on Wed Sep 10 11:07 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.