Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

engine / trans mounts 200

posted by  Trev29 on  Tue Sep 30 10:22 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 17 05:56 CST 2014
[RELATED]

Look at the mounts. If they're deformed, bulging, soft and oily they're probably in need of replacement.

The mounts are rubber sandwiched between metal plates that bolt onto brackets. Often, on engine mounts,the plates will seperate from the rubber and slide off center. So check to see if the plates are in line with the rubber. (You could also try lifting the engine slightly to see if the plates have seperated.)
--
1980 245 Canadian B21A with SU carb and M46 trans






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New engine / trans mounts [200]
posted by  someone claiming to be fgtom  on Tue Sep 30 06:25 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.