Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Chainsaw method in the shop 200

posted by  Mac_Muz on  Wed Oct 1 08:52 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon May 30 19:26 CST 2011
[RELATED]

Well as a tech for Volvo back then I was pretty much flabergasted to read the tech sheet!!!! I ain't kiddin about the 4" hole saw bit either!!!

I never ever considered that so-called fix!!!!!!

One I like better was for the bassakwards V-6 from Renault..

This was for the camshafts.. Yup 2 cams both softer than a new born babies a$$!!! The fix????? Cut 2 holes in the fire wall to pull the slimy cams into the passenger compartment, after riping out the entire dash!!!

I never did that one and hauled off the heads and gave away free to the customer the gaskets, and made Volvo buy the gaskets back.... and the time...

Butchery is not part of what a tech should be.... Mac






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Blower Motor Season [200]
posted by  percolate  on Sun Sep 28 06:23 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.