Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

A/C comressor compatability? 200 1983

posted by  anderssj on  Wed Oct 8 05:15 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 17:03 CST 2014
[RELATED]

Hi!

I just went the other way, installing a rotary compressor in place of the old York on my 83 turbo/b21ft. Everything lined up fine . . . .

I'm assuming that if I can go to a rotary on the b21, you can go to the York on the b230--but you will have to transfer over the york's red mounting plate (between the compressor and the engine block). It may also require the xfer of a couple of studs, instead of the bolts used on the 230.

I think even the belts from the old engine will work on the newer one.

Good Luck,

Steve Anderson






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New A/C comressor compatability? [200][1983]
posted by  Breadman  on Tue Oct 7 15:07 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.