Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2015 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

How do I pull the cam gear? and other stuff... 900 1994

posted by  avirfl on  Tue Oct 14 14:52 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I am changing the head gasket, and I have run into a couple of problems...

1 -- how do you pull the cam shaft gear?

2 -- my timing belt tensioner is not flexing on the spring, is this a problem?

3 -- what tool do you use to reach some of the 13mm bolts holding the manifolds on? both the intake and exhust? do I need to take off the fuel injection stuff?

4 -- the FAQ stated to rmove all of the belts, I have not had to do this yet to get to the head and screws, am I missing something?

Anything else? So far it has been pretty easy, I am going to get bolts for the exhust manifold tomorrow, as I broke one and the rest are (except for the 2 I can't reach) pretty seized up.

Thanks!

Avi





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New How do I pull the cam gear? and other stuff... [900][1994]
posted by  avirfl  on Tue Oct 14 14:52 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.